Studi Laboratorium Pengaruh Penambahan Fracseal Pada Suhu 80°F, 130°F, 180°F Terhadap Lumpur Pemboran
DOI:
https://doi.org/10.54423/jtk.v6i2.118Keywords:
drilling mud, fracseal, rheology, temperature, lost circulationAbstract
This study aims to evaluate the effect of 3% fracseal addition on the rheological properties and filtration characteristics of drilling mud at temperatures of 80°F, 130°F, and 180°F. The research was conducted experimentally through laboratory testing of plastic viscosity, yield point, gel strength at 10 seconds and 10 minutes, and filtration loss based on API RP 13B-1 standards. The results indicate that standard drilling mud experienced rheological degradation with increasing temperature, characterized by reduced plastic viscosity, excessive gel strength, and increased filtration loss. In contrast, the addition of fracseal improved rheological stability, increased yield point, and reduced filtration loss up to 180°F. These findings suggest that fracseal functions not only as a lost circulation material but also as a rheological stabilizing additive for high-temperature drilling operations.
Downloads
References
Agriandita, I. (2021). Analisa pengangkatan cutting pemboran dengan perhitungan lifting capacity. Jurnal Migasian, 5(1), 60-63
Allawi, R. H., & Almahdawi, F. H. M. (2019). Better Hole Cleaning In Highly Deviated Wellbores. IOP Conference Series: Materials Science and Engineering, 579(1), 012007.
Anaugtuharesto, Y. (2024). Pengaruh penggunaan LCM terhadap nilai ECD lumpur pada pressure window sumur AY. PETRO: Jurnal Ilmiah Teknik Perminyakan, 13(3), 151-157
Khalid, I., Trisa W., Novrianti, Novriansyah, A. (2023). Analysis the effect of concentration and temperature of bagasse as lost circulation material (LCM) on drilling mud rheology. PETRO: Jurnal Ilmiah Teknik Perminyakan, 12(3),
Ningrum, W. A. S., Nugrahini, A., Kusuma, H. D. (2023). Analisis lumpur pemboran terhadap kerusakan formasi pada blok X, Prabumulih, Sumatera Selatan. ReTII: Prosiding Nasional Rekayasa Teknologi Industri dan Informasi XVIII, 539-548.
Pambudi, S. N. (2023). Evaluasi problem loss circulation pada pemboran sumur “SNP 01” lapangan “PMB” PT Pertamina Hulu Rokan. Skripsi: Universitas Pembangunan Nasional “Veteran”, Yogyakarta.
Pasarrin, y. R., Amiruddin, Ulfah, B. M., Laby, D. A., Afifah, R. S. (2024). Analisis pengaruh penambahan fracseal dan kalsium karbonat (CaCO3) untuk mengatasi lost circulation terhadap lumpur pemboran. PETROGAS: Journal of energy and technology, 6(1), 7-11
Pebriana, C., Fathan, H.R., Ulfah, B.M. (2025). Perencanaan high-performance water-based mud untuk mencegah lost circulation pada trayek 17,5 inci sumur moon. JUTIN: Jurnal Teknik Industri Terintegrasi, 8(4), 4275-4279
Purnomosidi (2021). Material hilang sirkulasi berbahan dasar serat. MIGASZOOM: jurnal nasional pengelolaan energi, 2(1), 19-26.
Satyawara, B. (2018). Pengaruh temperatur terhadap sifat fisik sistem low solid mud dengan penambahan aditif biopolimer dan bentonite extender. Petro: Jurnal Ilmiah Teknik Perminyakan, 7(4), 144-151
